Ultra-Fab Ultra Scissor Jacks - 24" Lift - 13,000 lbs - Qty 2
(660 reviews)
Price: $121.31
In Stock
Ultra-Fab Ultra Scissor Jacks - 24" Lift - 13,000 lbs - Qty 2
Item # UF48-979002
Our Price: $121.31
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (660)
- Q & A (0)
- Photos
Ultra-Fab Products Camper Jacks - UF48-979002
- Fifth Wheel Camper
- Pop Up Camper
- RV Motorhome
- Teardrop Camper
- Travel Trailer
- Stabilizer Jacks
- Scissor Jack
- 10001 lbs or More
- 2 Jacks
- 24 Inch Lift
- Ultra-Fab Products
- Bolt-On
- Weld-On
- Steel
This pair of scissor jacks can be either bolted or welded to the frame of your trailer or RV. Worm-gear mechanisms won't slip. Oversize footplates help to eliminate sinking and tilting.
Features:
- Scissor jacks level and stabilize 5th-wheel, travel, horse and cargo trailers
- Heavy-duty worm-gear jacking mechanisms prevent slippage
- Perfect for stabilizing loads
- Large footplates provide excellent stability
- Bolt-on or weld-on installation
- (2) 3" Wide x 10" long mounting plates have multiple holes to fit most applications
- Mounting hardware not included (3/8" bolt is recommended)
- E-Z crank handle included
- Sturdy steel construction
- Black powder coat finish resists corrosion
Specs:
- Quantity: 2 jacks
- Lift: 24"
- Collapsed height: 4-3/4"
- Collapsed length: 26"
- Support capacity: 13,000 lbs
- 6,500 lbs per jack
- Combined support capacity: 13,000 lbs
- Footplate dimensions: 4-1/2" wide x 9" long
- Mounting plates: 3-1/2" x 7-1/4"
- Lifetime warranty
Note: These jacks are designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer. Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of these jacks.
48-979002 UltraFab Scissor Jacks - 24" - 2 Pack
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Arrived Damaged
Customer Reviews
Ultra-Fab Ultra Scissor Jacks - 24" Lift - 13,000 lbs - Qty 2 - UF48-979002
Average Customer Rating: 4.7 out of 5 stars (660 Customer Reviews)
This pair of scissor jacks can be either bolted or welded to the frame of your trailer or RV. Worm-gear mechanisms won't slip. Oversize footplates help to eliminate sinking and tilting.by: Stacey 02/09/2023
Definitely a heavier duty version of our campers stock stabilizers. They bolted right up to the brackets and glad we have new stabilizers. I hope the paint lasts on these as that seems to be an issue with the other, cheaper stabilizers. Time will tell.
by: Brian04/13/2024
Straight forward drop in replacement for the old worn out jacks that came with my trailer. Mounting flange and holes were identical in size and location. These were about 3/4" longer than the old jacks but that wasn't enough to cause an issue.
The best thing about these is that they are much sturdier than the old, cheap jacks Forrest River installed at the factory. The scissor legs are wider and the screw is larger with finer threads. Possibly overkill for my single axel trailer that weighs at most 6,000lbs fully loaded but the price was right so I bought 4 of them.
The only CON is that the screws were not straight right out of the box. I don't think this will cause an issue for normal operation but I was a bit surprised to see the whole scissor assembly wobble when lowering and raising them.
by: Steven11/08/2019
if I had to rate this upgrade in difficulty one being the easiest five being the hardest, it would be a one. Super simple. Take the nuts and bolts off your old hardware and install the upgrade in its place. I read some of the reviews were people were annoyed with the counter clockwise rotation and the bolt sticking out too far. I really didn’t see a problem with either. I know you’re not supposed to use a drill to extend and retract these but I always have. I suppose as long as you’re not torquing the heck out of the adjustment screw you shouldn’t have any problems. I always put a small flat 2 x 6 piece of wood under the foot of each one of these. It seems to add quite a bit of stability.
Steven
11/9/2020
Perfectly! Keep em clean with a coat of lubricant & theyll serve you well!
by: Scott D.03/09/2016
The jacks themselves have worked great, they keep the trailer level and solid during our concession events. I just had them mounted to the trailer so I don't have to put them in and out at each event. The jack handles leave a bit to be desired so I use a 20v drill w/ a 3/4" socket to run them up and down.
by: Tim 04/16/2024
Jacks hold up good to everyday usage
by: weszab01/17/2014
Easy to mount jack
Closes to a very small size
Load and unload without the trailer connected.
Weszab
1/17/2015
The jacks are still working great. Thanks again!
by: Biro07/03/2023
Great Addition to Flagstaff camper!!!!!Pop up camper came installed with only 2 stabilizers. We added these 2 to the front . We love the extra stability. Easy to install with self drilling/tapping hex head screws.
by: Dave B.04/23/2014
eTrailer processed the order quickly and I had the jacks within 3 days....thank you eTrailer. They were really easy to install and operate flawlessly. I was concerned that they threading would be too fine and the jacks would take forever to raise and lower, but I was wrong. They operate smooth and fast with no issues.
If you need to stabilize the back end of your trailer I would certainly recommend these.
by: Bill D05/15/2023
I bought these two jacks for the rear of my Keystone Bullet. I had already purchased two and installed them on the front. The trailer seems more stable now, with not so much motion evident when moving about inside the trailer. No drilling was necessary. The jacks bolted on using the existing holes in the trailer (2016 Keystone Bullet 311BHS).
by: Thomas 06/14/2023
These scissor jacks work well. Installation was relatively easy, just had to drill a few holes. The only reason I'm giving 4 stars instead of 5 is that they turn counterclockwise to extend and all the other jacks of this type I've used turn clockwise. This isn't a huge deal but I didn't see anything in the description that mentioned the reversed threading.
by: Harry06/03/2019
I purchased these stabilizers to replace the electric stabilizers on my 2017 Jayco. The electric stabilizers were terrible. They rusted in two years and didn’t do much to stabilize the camper. These new ones installed quickly and easily and I immediately noticed the difference. They arrived within 3 days of ordering.
by: Mark Cornell05/11/2020
The jacks worked excellent and will definitely recommend this company to anyone needing parts for their RV... I will be buying more things for my camper soon
by: Brian05/16/2023
Bought these for my 2018 Rockwood Mini Lite 2506s to replace all 4 of my jacks. They were only 5000 lb jacks and were all bent up. These jacks are beefier and hold 1500 more lbs per jack. Bolts up perfectly in the same holes. Also the trailer feels more sturdy when they are all down.
by: Tony06/27/2018
New jacks and tires arrived quickly. Installation was easy since no new drilling was required.
by: Jerry06/05/2018
Excellent people to deal with, fast shipping and I mean fast. Excellent product did exactly what we wanted, no more swaying.... Yay. Only took 2 hours to install, fast and easy
by: Keith04/03/2023
Was a very simple unbolt old and install new. The mounting hole on the jacks matched up with the pattern on the jacks being replaced so there was no extra drilling required.
by: Bobby F02/02/2023
I have used these scissor jacks on a trailer stand hunting blind. Which is a top heavy situation. The jacks on all 4 corners of the trailer added a tremendous stable platform.
by: Patrick 10/11/2023
These appear to be exactly the same as the jacks on my camper. Very good quality.
by: Lee01/16/2017
Another great fit, mine were destroyed and these were direct replacements, no cutting no welding .. thank you
by: Gene S08/12/2014
By weight alone, two of the removed OEM jacks weighed what one of the jacks I just received weighs. The Quality it great and they fit right where the previous jacks fit. The Travel Trailer feels more stable with the new jacks and I can now get a little help when minor level is required when parked on uneven surfaces. I should have done this right away, not after coming back from a 7000 mile trip. The OEM jacks would twist if I put too much load on them and the new jacks do not have that problem.
Gene S.
8/12/2015
Jacks more better than original jacks. OEM Jacks barely supported my trailer, but after installing the new jacks in all four corners my Travel Trailer is more steady than it ever was.
by: WhoisMe5810/16/2019
All 4 Jacks arrived as stated. I Have placed them on the RV. They are doing as described. Very Happy. This the 2nd time I have ordered Stabilizer Jacks. These are for a second Trailer. I also have quick Jack Releases for the Jacks as to be easily removed for storage. I will continue to order again from this company.
P
10/18/2020
Great I am always on the move and they make it so much easier. A lot better than my original Jacks.
by: Anthony08/21/2023
Great, get 2 for price of one from local dealer
by: Michelle 11/23/2022
We installed the scissor jacks last year. One was in one direction and the other one winds in the opposite direction. Never saw anything like that before ever. Then when lowering the jack for the first time it folded like nothing we have seen before. I work hard for my money and the scissor jacks purchased were not built well at all (they didn’t even make it thru the first use)
by: Keith12/22/2021
Bought 2 to level our truck camper. Jacks are rugged enough to hold truck and camper once lifted but they did need help from the trucks jack to lift to desired level. Not enough lifting power for this application
Sierra K.
12/29/2021
These jacks are designed to stabilize a portion of your trailers weight, not to support the full GVWR of your trailer. Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of these jacks. The support capacity per jack is 6,500 lbs and the combined support capacity is 13,000 lbs, but please note that these are not for lifting.
by: Gary 08/30/2023
Fit perfect
25
660
Show More Reviews
See what our Experts say about this Ultra-Fab Products Camper Jacks
- How to Add Ground Clearance to Fleetwood Travel TrailerTo add clearance on your 2004 Fleetwood Terry Travel Trailer I recommend installing what is called an over/under conversion kit, which moves your trailer's leaf springs to the top of your axle and lifts your trailer approximately the same amount as your axle's diameter plus the height of the leaf spring pack (please keep in mind this conversion kit is for use with double-eye springs only). I have added a photo a customer sent in which displays how the kit will look after being installed. If...
view full answer...
- Recommended Flatbed Cargo Trailer Stabilizer Leg for Rear of TrailerFor your Sure Trac ST9614 HLODOD-B-140 trailer I recommend adding the Ultra-Fab Ultra Scissor Jacks - 24" Lift - 6,500 lbs - Qty 2 # UF48-979002. I believe these will work well to stabilize your trailer for loading. They can be adjusted using the hand crank or you can use the Ultra-Fab Speed Socket Power Drill Adapter for Scissor Jacks # UF48-979005 if you prefer. If you want more of a solid mount drop leg stabilizer that you would weld on, we have the Square Drop Leg Stabilizer Jack...
view full answer...
- What System Can I Use to Both Stabilize and Lift my Camper?I have a solution for you but using any type of stabilizer jack to lift your camper is a no go. They are designed specifically to stabilize they are not rated for lifting. In most cases during storage it is not required to lift your wheels off of the ground they will generally keep their round shape as long as they're inflated properly and will be just fine when you pull it out for use. We do have a storage option generally used for vehicles but that will work great if you are concerned...
view full answer... - Leveling Jack for MotorhomeTo add a new leveling jack to your 2008 Tiffin Phaeton I recommend checking out the Ultra-Fab Power Twin II Electric Stabilizer # UF39-941707 which will work on the rear of your Phaeton so long as it has a frame that is between 42" and 77"; it also require 24" of space on the frame of your motorhome. This has a pair of 12V motors that level independently of each other and has a 6,000 lb weight capacity. For a manual option there is the Ultra-Fab Ultra Scissor Jacks # UF48-979002, which...
view full answer... - Recommended Stabilizer Jacks for a Class A MotorhomeFor your Class A Motorhome you are probably going to want to use the Ultra-Fab Ultra Scissor Jacks part # UF48-979031 instead of the Ultra-Fab Ultra Scissor Jacks part # UF48-979002 as they offer more lift which will be needed. They are designed exactly for what your asking which is to help stabilize the motorhome while parked. They will do an excellent job of this and you can install as many of them as you like but you will want to match the numbers on each side. They will require drilling...
view full answer... - stabilizing jacksOn your 1985 Ford Econoline Class C I recommend using the Ultra-Fab Ultra Scissor Jacks part # UF48-979002 they will be a perfect match. The 24" of lift will work even in uneven terrain while camping. They will also make a world of difference when it comes to keeping everything steady and prevent all of the shifting you currently get. When using these they should be attached to your frame. When collapsed they are only 4 3/4" thick if you'll install these to the frame half way between the...
view full answer... - Can Ultra-Fab Power Twin II Electric Stabilizers be Installed on a Mercedes Benz Sprinter Cargo VanUltra-Fab Power Twin II Electric Stabilizer # UF39-941705 is designed for trailers but technically it could be installed on your Mercedes Sprinter cargo van. The only issues that you could run into are limited available frame space on the Sprinter and ground clearance. What I recommend is to use a couple of scissor jacks such as # UF48-979002 with the electric drill adapter bit, # UF48-979005 (to raise and lower the jacks fast). I would leave them detached from the vehicle though to eliminate...
view full answer... - What Front Stabilizer Jacks do You Recommend for My 2018 NuCamp 320s? Thanks so much for reaching out to us. I went ahead and did some research on your 2018 NuCuamp model 320s tear trailer. From the available specs, you have standard manual front/rear jacks. If you need replacement jacks for your front end of the trailer, while we do not carry a direct factory replacement, I recommend using the Ultra-Fab Ultra Scissor Jacks - 24" Lift - 6,500 lbs - Qty 2 # UF48-979002. Our neighbors have raved about using these jacks with their tear campers and have left...
view full answer...
- Can Scissor Jacks Be Used to Stabilize a 31 Foot Class C RVYes, scissor jacks like # UF48-979002 work well as stabilizers for trailers and RVs. You also might want to consider the 4-pack of stabilizers, # UF48-979004. Each one of these has a capacity of 6,000 pounds. They are for stabilizing only and not for lifting. They stack or nest together or easy storage. They are height adjustable from 11 inches to 17 inches. A great option if you do not want something permanently attached to the trailer.
view full answer... - Recommended Replacement Leveling Jack for 1998 Sunnybrook Travel TrailerFor your 1998 Sunnybrook travel trailer, I recommend the Ultra-Fab Ultra Scissor Jacks - 24" Lift # UF48-979002. With these jacks you can use the Ultra-Fab Speed Socket Power Drill Adapter # UF48-979005 for an easy system. If you just need one jack, you can use # UF48-979006. You also may be interested in the Hopkins Electronic LED Smart Level for RVs and Trailers # HM08201 to make leveling easier.
view full answer... - Bolt Recommendation for Installing Ultra-Fab Scissor Jacks to Trailer FrameThe Ultra-Fab Ultra Scissor Jacks # UF48-979002 will work well on your C-channel frame. You can attach them with #14 self-tapping screws in the smaller holes and then the manufacturer suggests using 3/8 inch grade 5 bolts for mounting in the larger holes.
view full answer... - Can Leveling Scissor Jacks, # UF48-979002, be Used to Level a Class C Motor HomeAccording to Husky, the Leveling Scissor Jacks, # UF48-979002, are designed for recreational vehicle leveling only and should not be used for lifting or changing tires. It sounds like you just want to get your RV level so the combined 13,000 pound capacity of each jack (6,500 pounds each) should work well for this application. Husky also states that only the included hand crank should be used to raise/lower the jacks, so I cannot recommend using any power tools to operate them. I went...
view full answer... - Recommended A-Frame Jack With 24 Inch LiftThe reason your scissor jacks may be failing is if you are lifting your trailer with them; scissor jacks are designed to stabilize a trailer and not jack it up. So while scissor jacks like the Ultra-Fab # UF48-979002 are going to be more than enough to stabilize your food trailer they are not designed to lift. Instead, you'll need something like the Stromberg Carlson Electric Trailer Jack # JET-3755 (Black) or # JET-3555 (White) which is for A-frame trailers and offers a 3,500 lb lift capacity...
view full answer... - Scissor Style Stabilizer Jack for 16 foot Casita TrailerThe Ultra-Fab # UF48-979002 Scissor Stabilizer Jacks aren't Travel Trailer specific, they can be sued on just about any travel trailer. Each jack can support 6500 lbs of weight and has a maximum lift of 24 inches. Stabilizer jacks aren't meant to lift the trailer, only to prevent the trailer from rocking while people are moving around in it.
view full answer...
- Can Trailer Scissor Stabilizer Jacks be Used to Change Trailer SpareWe are aware that in emergency situations people will use their scissor jack like part # UF48-979002 as a way to jack up the rear of their trailer. But this is not what they are intended to do so I would recommend you not do this. They are not designed for the full weight of a trailer. Instead I would recommend you use something like the part # EZ-JACK which will give you an easy way to jack up the trailer to change the spare. You would need to roll up your trailer wheel on the side of...
view full answer... - Dimensions of Top Bolts on Ultra-Fab Ultra Scissor Jacks # UF48-979002I went out to the warehouse and pulled the Ultra-Fab Ultra Scissor Jacks # UF48-979002 and took some measurements for you (see image). The bolts on the top of the arms measure 2 inches center to center. The bracket measures 3-1/2 inches wide. Sounds like it will work for your application. I have included a video review of this jack for you to check out.
view full answer...
- Can Fulton Drop-Leg Stabilizer Jack with Mounting Channel be Welded to an Aluminum FrameThe biggest issue you will run into is the actual welding process. There are different heat requirements for aluminum components and steel components. Not that it can't be done but the welder would need to have experience welding steel to aluminum. There is also the issue of galvanic corrosion that you mentioned. Your best option is to use a couple of scissor jacks, # UF48-979002, and bolt them to the bottom of the trailer frame. This will allow you to paint, prime, or otherwise treat...
view full answer... - Scissor Jack and Drop-Leg Jack Stabilizers for Keystone OutbackScissor jacks are a simple and cost-effective way to stabilize a trailer. A scissor jack set such as # UF48-979002 or one of the others shown on the linked page do require a bit of hand-cranking but the trade-off is excellent value and simplicity. You will want to select scissor or drop-leg jacks that give you the height range that is appropriate for the specific trailer height. You can refer to the linked article for more information on various types of jacks.
view full answer... - Can a Bulldog Pipe-Mount Swivel Jack be Used to Stabilize the Back of a TrailerBulldog trailer jack # BD151101 could be used for your application, yes. But usually on the back of the trailer you will find stabilization jacks and not lifting jacks. Stabilization jacks do exactly what you are describing. Scissor jacks such as # UF48-979002 are popular as stabilizers. I have linked videos of each of these products as well as a link to all of the stabilizer jacks we carry.
view full answer... - How to Secure Solera Awning to Prevent Motion of the TrailerThere are a couple of potential fixes for unwanted motion of your Keystone Cougar 5th wheel when your awning is deployed and catches the wind. One is to simply retract the awning when the weather gets a little gusty. The other is to ensure your trailer's stabilizers like # LC298707 and # UF48-979002 are properly set on a firm surface.
view full answer... - Recommended Replacement Scissor Jacks for a 2016 Jayco X17ZMatt, I'd say yes # UF48-979002 would be a bit overkill. Plus, you only get two jacks in that kit and the other kit # TJSCHD-24-4 you get 4 which is going to stabilize your trailer better. The 10K capacity that # TJSCHD-24-4 has is going to be plenty in my opinion, especially since your trailer only weighs 3,500 lbs.
view full answer... - Recommended Scissor Jacks For 2004 Forest River Wildwood RVThere are a couple things you will want to know before selecting scissor jacks for your RV. You want to make sure you do not over extend the jack and you want to make sure the jack has adequate strength. I am not aware of any charts for the different manufacturers for selecting jacks. In my opinion I would go with the 30 inch jacks like part # UF48-979031 because they have less chance of being over-extended. The 24 inch jacks, part # UF48-979002 have the same weight capacity at 6,500...
view full answer... - Stabilizer Jack for 2012 Keystone Outback TrailerFor your 2012 Keystone Outback a great option for a new stabilizer jack is the Lippert Components High-Speed Power Stabilizer Jack # LC298707 so long as your trailer can match the mounting hole spacing, which is 68-11/16" from center-hole to center-hole. If you wanted a manual stabilizing jack, the Ultra-Fab # UF48-979002 are a good option. These jacks have a combined support capacity of 13,000 lbs, offer 24" of lift and can be bolted or welded on.
view full answer... - Scissor Stabilizer Jack MaintenanceThanks for your business. For your stabilizer jacks, I simply recommend using LubriMatic White Lithium Grease cartridge # L11354. This will keep the threaded rod and the pivots properly lubricated and keep them from corrosion. The rest of the jack should be powder coated to keep it from corrosion unless damaged.
view full answer...
Do you have a question about this Camper Jack?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Expert Research:
Victoria B
Written by:
Lindsey S
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Kristen H
Updated by:
Halie H
Updated by:
Michael B
Updated by:
Eric H
Video by:
Kathleen M
Installed by:
Randy B
Video Edited:
Chris R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Stacey
2/12/2024
Very Satisfied.